Configuring and Using the EMI 2|6
45
Owner’s Manual
Version 1.1
2
2
2
2
recording. Please note that 24 bit settings should only be used
if your software supports this format.
Confirm any changes made to the settings by pressing the OK
button.
On Windows systems, you can reject changes by clicking on the
Cancel button. Clicking on the blue icon from within this win-
dow, launches the Device Options control panel (Windows only).
Setting the Input Level
Note that controlling the actual input level must be set at the
source—i.e. a mixing desk etc.
If you wish to record non line-level sources, such as micro-
phones and guitars, use an external mic preamplifier, such as
that found on a mixing desk, and route the signal from the
mixer’s sub groups into the EMI 2|6 analog or digital inputs.
Note that use of the EMI 2|6 digital inputs requires a digital
mixing desk or other digital device.
The Mac OS Sound Control Panel
To use the EMI 2|6’s audio functions in any SoundManager
reliant application, you will need to select an audio input and
output source from the appropriate tabs in the Sound control
panel. The sample rate is fixed at 44.1kHz.
Bit depth and input/output options in Mac OS 9.0.4 (or higher
Mac OS 9 versions) are restricted to “16-bit” and “Stereo”.