26
Installation and Updating
Emagic
EMI 2|6
configuration and use of the EMI 2|6 can be found in the next
chapter.
Installation on Windows 98 SE
The EMI 2|6 driver package will not run under Windows 98
“First Edition”. To ensure that you are really running the sec-
ond edition of Windows 98, right click on the “My Computer”
icon on your desktop and select Properties. Under System:
“Microsoft Windows 98, Second Edition, 4.10.2222 A” should
be displayed.
•
Start and boot your computer completely. Insert the EMI 2|6
drivers CD-ROM into your computer’s CD-ROM drive.
•
Connect the EMI 2|6 to any of your computer’s unused USB
ports via the supplied USB cable. The “Add New Hard-
ware” Wizard will automatically launch.
•
Click on the “Next” button.
•
Select the: “Search for the best driver for your device. (Rec-
ommended).” radio button.
•
Click the “Next” button.
•
Select an optional search location, if necessary. If you are in-
stalling the driver from CD-ROM, check the CD-ROM
drive option.
•
Click on the “Next” button.
•
The: “Windows is now ready to install the best driver for this
device.” dialog will appear.
•
Click on the “Next” button.
•
After a few seconds, the following message will be displayed:
“Emagic EMI USB Device, Windows has finished installing
the software that your new hardware device requires.”
•
Click the “Finish” button.
•
This will launch the: “To finish setting up your new hard-
ware, you must restart your computer.” message.
•
Click on the “Yes” button and your computer will restart.
•
Several “New Hardware Found” boxes will be displayed
when Windows relaunches. In some cases, you may need to