3-7
Installing Board Options
The jumper is a small electrical connector that control circuit or function in your system. Jumper is a
small block on a circuit board with two or more pins emerging from them.
To change a jumper setting, pull the plug off its pins and carefully fit it down onto the pins indicated.
The jumper setting in your computer is preset at the factory; however, you can alter the function
by changing the standard setting:
●
Determines the BIOS Setup program’s mode
Changing the Jumper
CAUTION
Do not change the jumpers with the power on. Always turn off the computer and unplug the power
cord from the computer before changing the jumpers.
Function/Mode
Normal
Configure
Recovery
Jumper Setting
Configuration
The BIOS uses current configuration information and passwords for
booting.
After the POST runs, Setup runs automatically. The maintenance
menu is diplayed.
The BIOS attempts to recover the BIOS configuration. A recovery
diskette is required.
1-2
2-3
None
3
1
3
1
3
1
Summary of Contents for D845GVSR
Page 2: ......
