2-12
Using the BIOS Setup Program
Feature Description
Exit Saving Changes
Exits and saves the changes in CMOS RAM.
Exit Discarding Changes
Exits without saving any changes made in Setup.
Load Setup Defaults
Loads the default values for all the Setup options.
Discard Changes
Discards changes without exiting Setup. The option values (present when the
computer was turned on) are used.
Exit Menu
This menu is for exiting the Setup program, saving changes, and loading and saving defaults.
Feature Options Description
1st Drive
Dependent on
Specifies the boot sequence from the available ATAPI CD-ROM drives.
installed
To specify boot sequence:
ATAPI CD-ROM
drives
ATAPI CD-ROM Drives Submenu
This submenu is for setting ATAPI CD-ROM drive priority.
1. Select the boot device with <
> or <
>.
2. Press <Enter> to set the selection as the intended boot device.
NOTE
This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported
by the BIOS.
Summary of Contents for D845GVSR
Page 2: ......
