EMAC PCA-6782 User Manual Download Page 43

Page: 43 / 96

PCA-6782 User Manual

3.3.2

IDE Configuration

Figure 3.5 IDE Configuration

ATA/IDE Configuration

This can be configured as Disabled or Enhanced.

Configure SATA as

This can be configured as IDE or AHCI.

SATA1/SATA2/SATA3

While entering setup, the BIOS automatically detects the presence of SATA
devices. This displays the status of SATA device auto-detection.

IDE Master / Slave

While entering setup, the BIOS automatically detects the presence of IDE
devices. This displays the status of IDE device auto-detection.

AHCI Configuration

AHCI is a new interface specification that allows the SATA controller driver to
support advanced features. While entering setup, BIOS auto detects the pres-
ence of AHCI devices. This displays the status of auto detection of AHCI
devices.

Summary of Contents for PCA-6782

































































































Search results

Summary of Contents for PCA-6782

Reviews:

Related manuals for PCA-6782

Brands by name

Popular brands

EMAC PCA-6782, User Manual

Search results

Summary of Contents for PCA-6782

Reviews:

Related manuals for PCA-6782

Brands by name

Popular brands