ELZAB Prima 2, User Manual

Page: 19 / 32

ELZAB S.A. User Manual PRIMA 2 scale
17
– TRANSMITTING THE MINUS
Setting value Meaning
^
ONLY POSITIVE
The negative result is considered as unstable and is not sent.
POSITIVE AND NEGATIVE
The negative result can be sent if it is stable.
– TRANSMITTING THE RESULT FRAME
Setting value Meaning
^ ONLY STABLE
The result frame is sent only when the result is stable.
STABLE AND UNSTABLE
The result frame is sent after stabilizing the result or after the time witch
is set in “
STABILITY WAITING TIME”
menu . If the result
hasn’t stabilized during that time the frame that is sent contains the
signs 0x20 in place of the result digits.
– STABILITY WAITING TIME
Setting value Meaning
0 SECOND
1 SECONDS
2 SECONDS
^
4 SECONDS
6 SECONDS
8 SECONDS
10 SECONDS
12 SECONDS
Specifies the waiting time for stabilizing the result. Time runs from the
moment of requesting the result by key pressing or serial interface. If
the time was set at 0 seconds the result must be stable at the
moment of requesting the result
.
– DATA RECEIVING LOCK
Setting value Meaning
^
LOCK OFF
The scale receives the commands via the
CASH REGISTER/PC
CONNECTOR.
LOCK ON
Receiving the data via the
CASH REGISTER/PC CONNECTOR
is
locked.
– TRANSMISSION KEY LOCK
Setting value Meaning
^ LOCK OFF
Data can be transmitted by using the key.
LOCK ON
Transmission of the data by using the key is locked.
– CONFIGURATION RECEIVING LOCK
Setting value Meaning
^
LOCK OFF
Receiving the data from ELZAB cash registers
for automatic configuration of the scale is unlocked.
LOCK ON
Receiving the data from ELZAB cash registers
for automatic configuration of the scale is locked.