59
Fig 5-25 Network Configuration-Server
5.6.4 NAT
1 - Go to Main Menu
Setup Network NAT interface. Refer to Fig 5-26.
2 - Enable NAT and input the NAT Server (The default NAT Server is www.autonat.com).
3 - Click “Apply” to save the settings.
SMTP Server/Port: The name and port number of SMTP server. You can set up SSL check (such as Gmail) according to actual needs.
5.6.3 Server
This function is mainly used for connecting ECMS/NVMS. The setting steps are as follows:
1 - In the server interface, select “Enable” as shown in the Fig 5-25.
2 - Check the IP address and port of the transfer media server in the ECMS/NVMS. The default server port for auto report is 2009. If it is modified, please
go to the transfer media interface to check.
3 - Enable the auto report in the ECMS/NVMS when adding a new device. Then self-define device ID and input the remaining information of the device in
the ECMS/NVMS.
4 - Input the above-mentioned server IP, server port and device ID in the server interface. Then click “Apply” button to save the setting. Now, the ECMS/
NVMS system will automatically connect this device.
Fig 5-26 Network Configuration-NAT
5.6.5 Other Settings
If your NVR is set to use PPPoE as its default network connection, you may set up DDNS to be used in connection. The setting steps are as follows:
1 - Enable DDNS server.
2 - Select DDNS server.
3 - Enter user name, password and host domain name of the registered website.
4 - Click “Test” button to test the effectiveness of the relevant information.
5 - Click “Apply” button to save the setting.
Fig 5-27 Network Configuration-Other Settings
Note:
The domain name selected by user is a banding domain name of NVR. User should logon the website provided by the server supplier to register a user
name and password and then apply for a domain name online. After the successful application, user can access the device from the IE client by inputting
that domain name.
Enable UPnP:
Select UPnP here and then enable UPnP function in your router. Therefore, there is no need for you to forward LAN IP address and port in
the router in connection of internet.
EN
