47
3.4 Live playback
Click Playback
button to playback the record. Refer to Figure 3-3. You can do complete operation by clicking the buttons on screen.
Fig 3-3 Live Playback
4 Add IP Cameras
This chapter mainly introduces how to connect multiple IP cameras through NVR. Once you finish adding IP cameras, you can see the live images through
the monitor of the NVR. For 8 CH NVR, you just need to directly connect the IP cameras to the device through PoE network ports. The live images will display
after you connect successfully. Of course, if there are free channels, you can connect the IPC via WAN/ LAN network. For 16 CH NVR, you may connect the
previous 8 CH directly to the device through PoE network ports and then add the IP cameras for the remaining channels into the NVR via WAN/LAN. Here
we will introduce how to add cameras through WAN/LAN.
To add IP cameras via LAN:
- Please go to Main Menu
IP Camera tab. Refer to Fig 4-1. Click “Search” button to search the devices in the same network. (The IPC which supports
the Onvif protocol may be added manually.)
Fig 4-1 Device Management
- Go to the search tab. Click “Refresh” to refresh the searched devices. If the IPC is not in the same local network, you can select the device and click “Setup”
to modify the IP address of the searched device. Refer to Fig 4-3.
Symbol
Meaning
Green
Manual record
Yellow
Motion detection record
Red
Sensor Alarm record
Blue
Schedule record
EN