GB
23
Placement
• Before use, remove all packing materials, including bottom
cushions, foam pads and tapes from inside the refrigerator;
tear off the protective film on the doors and the refrigerator
body.
• Keep away from heat and avoid direct sunlight. Do not
place the appliance in a damp or wet location, to prevent
rust or a reduction in insulation performance.
• Do not spray or wash the refrigerator; do not put the
appliance in a damp location where it could easily be
splashed with water, which could impair the electrical
insulation of the refrigerator.
• The appliance should be placed in a well-ventilated indoor
location on a firm and level floor (turn the feet left or right to
adjust the height if the floor is uneven).
• There should be at least 30 cm clearance above the
appliance, and at least 10 cm clearance from the wall, to
facilitate heat dissipation.
How to use the refrigerator
Precautions before installation:
Before installing or adjusting accessories, make sure that the refrigerator is unplugged from the power socket.
Be careful when handling the refrigerator to ensure that it does not fall and cause any personal injury.
Levelling feet
Diagram of the levelling feet
Adjustment procedure:
a. Turn the feet clockwise to raise the refrigerator.
b. Turn the feet counter-clockwise to lower the
refrigerator.
c. Adjust the right and left feet until the refrigerator
is level.
The illustration above is only for guidance. The actual configuration will depend on the actual product or the
distributor’s specification.
