59
GB
NO T E
: When removing the door, watch
for washer(s) between the lower hinge
and the bottom of the lower door that
may stick to the door. Do not lose.
1. Use a putty knife or thin-blade
2.Unscrew the special flange self-tapping
2.Unscrew the special flange self-tapping
3.Remove the upper hinge axis, transfer it
4.Remove the door from the lower hinge.
11
5. Place it on a smooth surface with its
panel upwards. Loose screw
tighten securely.
and pard
then install them to the left side and
6.Lay the refrigerator on soft foam
7
8. Transfer the door to the property
door.
9.Transfer the upper hinge part and
make the upper hinge axis into the upper
hole of the door, and adjust the position
of the door (please support the door with
your hand when doing it), fixing the upper
hinge part with the special flange
self-tapping screws.
Stop block
Self-tapping screw
5. Place it on a smooth surface with its panel
upwards. Loosen screw
2
and part
1
,
then install them on the left side and tighten
securely.
6. Lay the freezer on soft foam packaging or
similar material. Remove both adjustable
bottom feet parts and the lower hinge part
by unscrewing the special flange self-tap-
ping screws.
4. Remove the door from the lower hinge.
NOTE:
When removing the door, watch
out for washer(s) between the lower hinge
and the bottom of the lower door as they
may stick to the door. Do not lose them.
