58
GB
Note: If required you may lay the freezer on its back in order to gain access to the base,
you should rest it on soft foam packaging or similar material to avoid damaging the
freezer’s backboard. To reverse the door, the following steps are generally recommended.
1. Use a putty knife or thin-blade screwdriver to prize off the screw hole cover at the top left
corner of the freezer, and the upper hinge cover at the top left corner of the freezer, and
the upper hinge cover at the top right corner of the freezer.
NO T E
: When removing the door, watch
for washer(s) between the lower hinge
and the bottom of the lower door that
may stick to the door. Do not lose.
1. Use a putty knife or thin-blade
2.Unscrew the special flange self-tapping
2.Unscrew the special flange self-tapping
3.Remove the upper hinge axis, transfer it
4.Remove the door from the lower hinge.
11
Screw hole cover
Upper hinge
cover (right)
2. Use an 8mm socket driver or a spanner to unscrew the special flange self-tapping screws
which are used for fixing the right upper hinge part (support the upper door with your
hand when doing so).
NO T E
: When removing the door, watch
for washer(s) between the lower hinge
and the bottom of the lower door that
may stick to the door. Do not lose.
1. Use a putty knife or thin-blade
2.Unscrew the special flange self-tapping
2.Unscrew the special flange self-tapping
3.Remove the upper hinge axis, transfer it
4.Remove the door from the lower hinge.
11
Right upper
hinge part
Special flange self
tapping screws
3. Remove the upper hinge axis, transfer it to the reverse side and tighten securely, then put
it in a safe place.
NO T E
: When removing the door, watch
for washer(s) between the lower hinge
and the bottom of the lower door that
may stick to the door. Do not lose.
1. Use a putty knife or thin-blade
2.Unscrew the special flange self-tapping
2.Unscrew the special flange self-tapping
3.Remove the upper hinge axis, transfer it
4.Remove the door from the lower hinge.
11
