28
29
CBD6601V
GB
How to empty excess water from hoses
The drain hose should be located 40 – 100 cm above the floor and should not have any exten-
sions added. Otherwise, the machine cannot properly drain off dirty water.
Water connection
Connect the drain hose. To avoid leaks, the drain hose must be fitted correctly.
Ensure that the drain hose is not bent or pinched.
Extension hose
If you unexpectedly need to extend the drain hose, use a hose of the same type.
STARTING THE DISHWASHER
Before starting the dishwasher, check the following:
- The dishwasher is horizontal and firmly secured.
- The inlet valve is open.
- The supply hose’s connections are firmly tightened and do not leak.
- The cable is securely connected.
- The power is switched on.
- There are no creases in the supply and drain hoses.
- All packaging and documentation has been taken out of the machine.
Important!
After installation, keep the user manual!
The information in the user manual is very helpful for correct use.
