EluneVision Elara NanoEdge, User Manual

Page: 9 / 15

ASSEMBLY
15
Use the installation hook provided to mount the springs. Latch the shorter
hook onto the lip of the frame. Carefully pull the larger hook through the
hole in the screen and around the plastic rod. Make sure that the spring is
only around the rod and not caught on any fabric before you release it.
5e)
Repeat step e) until you have mounted every hole in the fabric with a
spring, in order as shown in c).
Follow the sequence indicated above in c) to minimize the unnec -
essary stress to the screen fabric.
You want to execute step e) with extra caution. When you let go
of the spring, you need to make sure the spring is only lying on
the plastic rod, otherwise the spring will tear through the fabric.
After completing step f), you can now stand the
screen up on its side as shown on the left. Make
sure the ground is free of obstacles and rough
objects before you do so. We recommend to
stand the screen on a soft cushion in addition to
the floor cloth we provided to prevent damage
to the screen as well as the flooring.
Do not slide or drag the screen across the floor.
5f)
ASSEMBLY
16
Have one person hold the screen upright by the aluminum frame on the
back and not by the fabric. Carefully inspect the front of the screen fabric.
The fabric must wrap around the Aluminum Frame so that the sleeve of
the fabric will not be shown over the 1/2” outer frame.
5g)
To eliminate the wrinkles on the screen, more material needs to
be wrapped around the frame for the springs to hold onto. This
will tighten the screen fabric and get rid of the wrinkles in the
process. This process has to be done manually and the procedure
is outlined as follows.
The below steps requires the use of tools or your hands to pull
directly on the fabric, exercise with caution. Do not pull on the
fabric using other methods or tools not described below.
Locate the wrinkles on the screen and the springs that are near them. Start
from the spring closest to the wrinkle and insert the Installation Hook
directly into the fabric sleeve. Make sure the installation hook is over the
fiber plastic rod and not the springs or the fabric alone. Pull the spring
upwards and away from the frame.