EluneVision Elara NanoEdge, User Manual

Page: 4 / 15

ASSEMBLY
You will be assembling the screen on flat ground. You will need a clear -
ance area of at least two feet away
from the screen (refer to General
Dimensions). Make sure no objects
are underneath the screen, as they may
cause permanent damage to the fabric.
Before you start handling parts, make sure the work area is safe and
remains safe during assembly and installation. Please note and be aware of
the following:
Parts may contains sharp edges.
You need to avoid touching the indicated spots. Do not
swing the aluminum frames; be aware of the edges when
you handle the frames. Protective gloves are recommended.
Beware of pinching point.
You need to be cautious joining pieces together when this
icon is present. Keep body parts away from the indicated
spots. Protective gloves are recommended.
Tools required.
You need to provide your own tools for this task to be com-
pleted. Incorrect tools may cause damage to the hardware.
Special attention needed.
Please refer to the description whenever this icon present.
Detailed instructions are in the description which are not
present in the diagram.
Assembling the screen requires two people, we
recommend you and your partner work together
to assemble the screen. Seek assistance when
handling heavy objects or hanging the screen.
5
ASSEMBLY
Aluminum Frame
Lay out the Inner Frame pieces across a flat surface. We recommend you
use a floor cloth to protect the assembly process.
The ends of the frame pieces will have marked numbers; lay out the frame
pieces in numeric order.
Insert two Joint Brackets into the slots of the two horizontal frame pieces.
Center the brackets, and then insert the Set Screws. Do not tighten the set
screws, as shown below:
1a)
1b)
6
Floor Cloth
Horizontal
Frame
Vertical
Frame
The Aluminum Frame and Velvet
Cover are pre-assembled for trans-
portation. Separate the outer frame
from the inner frame.