EluneVision Elara NanoEdge, User Manual

Page: 7 / 15

Screen Fabric
Now you will unroll the screen material and mount it onto the frame as-
sembled in the previous steps.
Make sure the ground is clear of any sharp obstacles and make sure there
is a floor cloth covering the ground. Do not remove the floor cloth until
the assembly is completed. The floor cloth will protect the fabric screen
against dirt or other particles from the ground.
Floor Cloth
Fabric Screen
(Facing Down)
11
3a)
ASSEMBLY
Unroll the fabric screen slowly from the cardboard drum onto the ground.
The front of the fabric should be facing the ground, and the back facing
upwards. There will be a label indicating the back of the fabric.
Wear protective gloves to prevent scratches or other damage to
fabric. Make sure the ground is free of sharp objects and do not
put any tools or other objects onto the fabric.
3b)
12
ASSEMBLY
4a)
4b)
Gather the plastic rods and sort according to length. The plastic rods will
be inserted into the sleeves on the outermost part of the fabric.
The rods have red rubber caps on each end to protect them from
damaging the fabric; do not take those caps off.
Insert the plastic rods into the four sides of the fabric. Make sure you are
using the correctly sized rod for the correct position as the rods should be
covering the whole sleeve of the fabric.
The four plastic rods of the same length make up the two horizon -
tal sides and the two rods of the same length make up the vertical
side of the fabric.