www.prolight.co.uk
TZ 250PC WW
User Manual
8
Manual dimming/focus mode:
To access the manual dimming/focus mode, press the
“MENU”
button on the rear of the unit to show
“Panel.Ctrl”
on the LCD display. The unit is now in manual dimming/focus mode. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the focus from
“000” - “255”
. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the brightness from
“000” - “255”
.
Alternatively you can access this mode by pressing either of the
“DIMMING”
or
“FOCUS”
knobs. Press
the
“DIMMING”
knob and turn to set the focus from
“000” - “255”
. Press the
“ENTER”
button to confirm
the setting. Repeat for the
“FOCUS”
knob.
(000 = LED off, 255 = LED at full brightness).
To exit out of any of the above options, press the
“MENU”
button.
Focus calibration:
To access focus calibration, press the
“MENU”
button on the rear of the unit to show
“Calibrate”
on
the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the focus
from
“000” - “255”
. Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Dimming curves
To access the units dimmer curves, press the
“MENU”
button on the rear of the unit to show
“Dim.Curve”
on the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to set the dimming curve required.
“Linear”
- LELinear dimming curve
“Square”
- LED Square dimming curve
“INV.Square”
- LED Inverse Square dimming curve
“S-Curve”
- LED S-Curve dimming curve
Press the
“ENTER”
button to confirm the setting.
To choose between Halogen and LED dimmer curves, press the
“MENU”
button on the rear of the unit to
show
“Lamp Behaviour”
on the LCD display. Press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons to set the dimming curve mode required.
“LED”
- LED dimming curves
“Halogen”
- Halogen dimming curves
To exit out of any of the above options, press the
“MENU”
button.
Operating instructions
