C
3C
The minimum distance between the light output lens and the illuminated surface must be more
than 12 meters.
Disconnect mains power before fuse/lamp replacement or servicing.
Replace fuse/lamp only with the same type.
In the event of a serious operating problem, stop using the unit immediately.
Never turn the unit on and off in short intervals.
The housing, lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
DO NOT open the unit as there are no user serviceable parts inside.
Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center if
needed.
Disconnect the mains power if the fixture is not being used for a long period of time.
Use the original packing materials for transportation.
Cautions:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.
Hot lamp explosion hazard. DO NOT open the unit within 15 minutes after switching off.
Replace the lamp once it is damaged, deformed or past its expiry hours.
DO NOT look directly at the unit while the lamp is on.
Never touch the lamp with bare fingers.
DO NOT start the unit without the lamp enclosure or when housing is damaged.
2. Technical Specifications
Power supply
- AC 100~240V 50/60Hz
Power Consumption
- 510W
Fuse
- T 10A
Light Source
- PHILIPS MSD Platinum 16R 330W
Battery backup display
Summary of Contents for ELUM021
Page 12: ...C 11C ...
Page 34: ...C 33C ...
