Elumen8 ELUM021, User Manual

Page: 17 / 36

C 16C
Backlight Auto Off
Select the Backlight Auto Off , press the ENTER button to confirm, the present mode will blink on
the display, use the UP / DOW N buttons to select No (display always on) or Yes (display goes off
one minute after exiting menu mode), press the ENTER button to store. Press the MENU button
back to the last menu or leave the unit idle for one minute to exit menu mode.
Backlight Intensity
Select the Backlight Intensity , press the ENTER button to confirm, the present mode will blink on
the display, use the UP / DOWN buttons to adjust backlight intensity from 1 (dark) to 10 (bright),
press the ENTER button to store. Press the MENU button back to the last menu or leave the unit
idle for one minute to exit menu mode.
Unit Temperature
Select the Temperature Unit , press the ENTER button to confirm, the present mode will blink on
the display, use the UP / DOWN buttons to select or , press the ENTER button to store. Press
the MENU button back to the last menu or leave the unit idle for one minute to exit menu mode.
Fixture Test
Enter the menu mode, select Fixture Test , press the ENTER button to confirm, use the UP / DOWN
buttons to select Auto Test or Manual Test
Auto Test
Select Auto Test , press the ENTER button to confirm, the unit will run built-in programs to
automatically test pan, tilt, shutter, colour, CMY, gobo, gobo rotation, prism, prism rotation, iris,
frost, zoom, focus, dimmer and lamp on/off. Press the MENU button back to the last menu or exit
the menu mode after auto test.
Manual Test
Select Manual Test , press the ENTER button to confirm, the current channel selection will show
on the display, use the UP / DOWN buttons to select the channel options, press the ENTER button
to confirm, then use the UP and DOWN button to adjust the value, press the ENTER button to
store, the fixture will run as the channel value indicates. Press the MENU button back to the last