WOP-2ac quick manual
4
2 Connecting the web interface
Connection of a PC to the device might be executed as follows:
•
Connect network cable to PoE interface of WOP-2ac and to PoE injector (or switch). Then connect a PC to
the PoE injector (or switch).
To connect to the web interface of the device, enter the following to the URL bar of your browser:
192.168.1.10.
If
the connection has been performed successfully, the authorization page will be displayed. Use the following data
for authorization:
•
User Name:
admin
•
Password:
password
If the authorization page is not displayed after entering the device IP in the browser, check the IP address on the
PC and switch settings. If the configuration on the device has been changed (is not a default one), reset the device
to factory settings. To perform this, press and hold the button «F» on the side panel of the device within 20
seconds.