WOP-2ac quick manual
14
To edit the settings in
«Clustering Options»
section, switch cluster mode to
«Off»
state.
In
«Clustering Options»
menu, perform the following configuration:
•
Location
– specify physical location of the access point. The option is used to analyse and control the
network in different monitoring tables.
«Eltex»
is used in the example;
•
Cluster Name
– set name cluster. The access point will be connected only to a cluster, which name is
specified in
«Cluster Name»
.
«default»
is used in the example;
•
Clustering IP Version
– select used IP version for management data exchange among access points in the
cluster.
«IPv4»
is used in the example.
•
Cluster-Priority
– set the priority of the device in the cluster.
«Eltex»
is used in the example;
Click
«Update»
to save changes.
In
«Single IP Management»
menu, perform the following configuration:
•
Cluster Management Address
– specify an address via which the device may access the master cluster.
The master should be located in the same subnet with the cluster.
«192.168.10.10»
is used in the example.
Click
«Update»
to save changes.
To enable cluster mode, select
«On»
in
«Clustering»
field.