WOP-2ac quick manual
17
To view the statistics, select necessary value and click
«Go»
in
«Display»
section. The following parameters might
be viewed:
•
AP Location
– access point's location. The value is obtained from location description on
«Basic Settings»
tab;
•
User MAC
– MAC address of client's wireless device;
•
Idle
– average time that the device has been in stand-by mode (when the device does not receive or
transmit data).
•
Rate
– transmit data rate between an access point and a particular client, in Mbps;
•
Signal
– a level of signal received from an access point;
•
R
х
Total
– total number of packets received by a client within current session;
•
Transmit Total
– total number of packets transmitted by a client within current session;
•
Error Rate
– total number of packets dropped by an access point within current session;
To view correspondence of access points in a cluster and wireless networks detected by these devices, switch to
«Wireless Neighborhood»
tab. There is a table, on
«Wireless Neighborhood»
tab, that shows which wireless
networks are detected by each access point and what signal level each access point accept.