WB-2P-LR5. User manual
62
•
•
•
•
•
•
UPnP is used by some applications (e.g. DC clients such as Fl+) to create forwarding rules for TCP/UDP
ports used by these applications on a higher router. It is recommneded to enable UPnP for operation of file
exchange services on a network.
Enable UPnP
– when checked, UPnP is enabled, otherwise – disabled.
Reserved VLAN ID
Reserved VLAN ID – the list of service VLANs, which are used for for solving intrasystem tasks.
Start VLAN ID
– starting VLAN ID value in the reserved range;
EndVLAN ID
– ending VLAN ID value in the reserved range.
Service Wi-Fi
Service Wi-Fi (available only for WB-2P-LR5 rev. C) is used when aligning Wi-Fi (section 3.5 Wi-Fi antenna
alignment). With Service Wi-Fi enabled, a Wi-Fi client can connect to the device via an open network with the
"EltexWiFi" SSID (2.4 GHz frequency band).
Wi-Fi enabled
– when the Service Wi-Fi flag is on, otherwise, it is disabled. Service Wi-Fi is enabled by
default.
Configuration via HTTP/HTTPS
– when checked, configuration via Service Wi-Fi is enabled.
Configuration via HTTP/HTTPS is disabled by default.
To apply a new configuration and store settings into the non-volatile memory, click the
'Apply'
button. To discard
changes click the
Cancel
button.
When «Use Management VLAN» is checked and Management VLAN configured incorrectly, there is a
posiibility of losing access to the device. The device will be available when connecting via Ethernet by
address 192.0.3.1.
To avoid unauthorized access to the device, after aligning Wi-Fi, you should disable the Technological
Wi-Fi
