_________________________________________________________________________________
_________________________________________________________________________________
TAU-72.IP/TAU-36.IP Universal Network Terminal 61
After implementation of changes, click
'Submit Changes'
button; to discard all changes, click
'Undo All
Changes'
button; to save changes, click
'Save'
button.
Use
'Defaults'
button to set default parameters (the figure below shows default values).
H323 settings:
–
Enable H323
—when checked, H.323 protocol is enabled.
–
Enable H.235
—when checked, use authentication on the gatekeeper with H.235 protocol.
–
Ignore GCF info
—when checked, output authentication data in RRQ message via H.235 protocol in any
events, otherwise—only in case of reception of supported hash method in GCF message. This setting
applies to operations with gatekeepers that do not send used hash method in a response to GRQ
request. In this case, the gateway will transfer MD5-encrypted authentication data for all RRQs, even if
supported hash method is not received from the gatekeeper.
–
Disable faststart
—when checked,
faststart
feature will be disabled.
–
Disable tunneling
—when checked, H.245 signal tunnelling through Q.931 signal channels will be
disabled.
–
Gatekeeper used
—when checked, use gatekeeper registration option.
–
Is gateway
—when checked, device registers on a gatekeeper as a gateway, otherwise—as a terminal
device. When registered as a terminal device, the gateway registers all configured subscribers' numbers
and a gateway name—H.323 alias—on a gatekeeper. When registered as a gateway, the gateway
registers its name—H.323 alias—only. To simplify the gatekeeper configuration, we recommend using