_________________________________________________________________________________
_________________________________________________________________________________
TAU-72.IP/TAU-36.IP Universal Network Terminal 165
aon
Caller ID mode
0—Caller ID is disabled
1—'Russian Caller ID' method
2—DTMF Caller ID method
3—FSK Caller ID method using
bell202 standard
4—FSK Caller ID method using ITU-
T V.23 standard
taxophone
Payphone mode
0—payphone mode is disabled
1—polarity reversal
2—16kHz meter pulse
3—12kHz meter pulse
category
SS category
0-255
min_flashtime
Lower limit of Flash impulse duration, ms
70-1000
flashtime
Upper limit of Flash impulse duration, ms
min_flashtime (no less than 200)-
1000
gainr
Volume of voice reception, х0.1dB
-230-+20
gaint
Volume of voice transmission, х0.1dB
-170-+60
cfb_pri_over_cw
Priority between CFB (Forward on busy) and CW
(Call wait) services
0—CW service has a priority over
CFB
1—CFB service has a priority over
CW
aon_hide_name
Transmission of Caller ID information in
Fsk_bell202, Fsk_v23 modes
0—information will be sent with a
subscriber name
1—information will be sent without
a subscriber name
aon_hide_date
Transmission of Caller ID information in
Fsk_bell202, Fsk_v23 modes
0—Caller ID information will be
sent with time and date
1—Caller ID information will be
sent without time and date
playmoh
'Music on hold' service
0–disable
1–enable
enable_cpc
Use a short-time break of the subscriber loop on
clearback from the opposite subscriber's side
0–disable
1–enable
cpc_time
Duration of a short-time break of the subscriber
loop, ms
200-600
cpc_rus
Subscriber category; when this setting is enabled,
the category will be sent in 'from' field, and 'tel
uri' will be used instead of 'sip uri'
0—disable categories
1-10—subscriber category
stop_dial
‘#’ button operation
0—recognize '#' as DTMF tone
1—use '#' to end the dialling
modifier
Modifier group used by this profile
0-15
port_0..71
—
port 0..71 custom settings
Enumeration of subscriber ports, used in a file, is less by 1 than enumeration, used in web interface and
on the device housing!!!
Example: 'port_0' in a file corresponds to 'port 1' in WEB interface and on the device housing.
phone
Subscriber number
String, 50 characters max.
or ""—parameter is not defined
user_name
Subscriber name
String, 50 characters max.
or ""—parameter is not defined
auth_name
Authentication username
String, 50 characters max.
or ""—parameter is not defined
auth_pass
Authentication password
String, 50 characters max.
or ""—parameter is not defined