IPTV Set-Top Boxes NV-720. User manual. Firmware version 1.1.0
64
1.
2.
3.
4.
5.
11 Appendix
А
Manual for programming the URC
To control the TV with the URC, you must assign the functions of the TV RC buttons to the URC buttons in the
TV CONTROL box. Only the buttons on the TV CONTROL box are used in TV CONTROL: TVIN, V-, V+ (figure 18).
Figure 18 — Universal remote control (URC)
To program the buttons of the URC, follow these steps:
Press and hold the «SET» button until a brighter red LED appears (about 3 seconds). It means that the
transition to the button programming mode is done.
Press the button which should be programmed. The red LED will start to flash.
Direct the infrared transmitter of the programmable RC to the TV RC (hold the remotes at a distance of
3-5 cm) and press the button on the RC of the TV which functions you want to transfer.
After successful programming of the RC buttons, the LED will flash three times, and then will begin to
glow. Now you can select other buttons for programming.
After programming the buttons on the remote, press the «SET» button to exit the button programming
mode. The red LED will turn off.
