Using This Product
with the New Sky Boxes
SUPPLEMENTARY INSTALLATION INSTRUCTIONS
Introducing the PROception proLINK22 ‘RF replicator’
New Sky set-top boxes such as the DRX595 and
DRX890W do not have the familiar aerial input,
RF-1 and RF-2 connectors. These RF-loop-
through facilities have been replaced with the
new ‘I/O PORT’ – a small round connector (10-
pin mini-DIN) which allows an external
‘RF replicator’ (modulator) unit to provide similar
distribution functions.
Features of the
PRO
ception proLINK22 RF Replicator
■
Flying lead plugs directly into the Sky I/O port.
■
Replaces the ‘missing’ RF facilities on new-style Sky boxes.
■
Compatible with all
PRO
ception return-path and dual-mode amplifiers (listed above).
■
RF loop-through for Freeview and VHF radio (replaces Sky AERIAL IN connector).
■
Integral modulator, output channel 21-60, simple to configure in Sky menu.
■
Remote control capability on both RF outputs, supports two remote outlets with IR
eyes (where no local RF output is required).
■
External power supply option for larger systems using proAMP104X, proAMP310X
and proMHD14R amplifiers.
How to use the
PRO
ception proLINK22
This instruction sheet should be read in
conjunction with the instruction leaflets
for the return-path amplifier and for
the proLINK22. The following notes are
a quick guide.
■
Simply plug the flying lead into the
I/O port of the Sky box.
■
Enable power and set the desired
modulator RF channel using Sky
Setup menu (key SERVICES, 0, 0, 1,
SELECT).
■
Where the instructions for the
return-path or dual-mode amplifier
show a connection to RF OUT-2 of a
Sky box, connect to an RF output of
the proLINK22 instead.
■
Where necessary*, connect a mains
power unit type proPSA125 to the
proLINK22.
* See notes overleaf to determine whether an external power unit is required.
PRO
ception
Applicable to the following models
proAMP12R proAMP104X
proAMP24R
proAMP310X
proAMP26R
proMHD14R
proAMP28R
proSAT1EYE
12 V
RF
IN
RF
OUT1
I/O
RF
OUT2
PRO
ception
proLINK22
‘RF Replicator’
Page 1
