ELTEX ES53 Series, Operating Instructions Manual

Page: 13 / 24

BA-en-2018-2006_ES53
13
3.3 Selecting the discharging bar
Only Eltex discharging bars for AC operation can be connected to the
ES53 power supplies.
3.4 Connecting the high voltage cable
Warning!

Electric shock hazard!
Always disable the supply voltage to the high voltage generator before
disconnecting or connecting the high voltage cables.
Connect the bars via the prefabricated high voltage cable. Push the high
voltage cables up to the stop into the connecting socket. Then secure the
adapter in the socket with the clip provided (see Fig. 3). Cables without
adapter carry a coloured marking on the flexible tubing. This marking must
lie flush with the outside edge of the coupling. Cables without flexible tube
and cables with plug-type adapters are plugged in flush and secured with
the clip.
Warning!

In applications involving moving bars (e.g. film draw strips), the high vol-
tage cable must be attached such that there is no cable movement near
the connection zone of the power supply unit.
Fig. 3:

Connecting the
high voltage cable
Z0
000
4
y