9
Elterm M.M.Kaszuba Sp.J., ul. Przemysłowa 5, 86-200 Chełmno
Room and DHW programs - settings
Room and DHW programs enable setting and maintaining requested temperature at any defined time
periods with one minute accuracy. Intuitive menu and illuminated display make the programming process
easy. All settings are stored in non-volatile memory and are not deleted even in case of a power off.
Electronic processor enables setting 9 independent programs, each can define requested temperature
within any given time span.
When two different temperatures from different programs overlap, higher one is prioritized.
I
MO
TU
WE
TH
FR
SA
SU
Active days:
all
II
MO
WE
FR
SU
Active days:
4
III
Mo
TH
SU
Active days:
3
IV
MO
TU
WE
TH
FR
SA
SU
Active day:
1 (
to choose)
V
MO
TU
WE
TH
FR
Active days:
working days
VI
SA
SU
Active days:
weekend
VII
MO
TU
WE
TH
FR
SA
Active days:
6
VIII
Active days:
any
IX
Active days:
any
1.
Weekdays,
2.
Program start,
3.
Program stop,
4.
Temp. setting: 20-70°C,
5.
Active: yes/no,
6.
Program number: from 1 to 9,
7.
Function buttons
1.8.
Settings/ROOM programs
– press
on home screen (
C
) and enter SETTINGS (
J
), then choose Room
programs (
L
) and press
once more. Using ←→ (
Z
) switch between parameters (weekdays, working time,
temperature, status), using ↑↓ change parameter value, which is then set by pressing
.
1.9.
Settings/DHW programs
(for
AsD-W
and
AsDC-W
) – press
on home screen (
C
) and enter SETTINGS
(
J
), then choose DHW programs (
L
) and press
once more. Using ←→ (
Z
) switch between parameters
(weekdays, working time, temperature, status), using ↑↓ change parameter value, which is then set by
pressing
.
Active/Inactive status
– each program can be temporarily turned off. In order to do that, change status
within selected program (either Room or DHW one) for: no (
b
). To activate previously turned off program –
set status for: yes (
a
).
1.10.
Settings/Circulation pump
– press
on home screen (
C
) and enter SETTINGS (
J
), then choose
Circulation pump and press
once more. Using ←→ switch between parameters (weekdays, working
time, temperature, status), using ↑↓ change parameter value, which is then set by pressing
.
