Eltek Smartpack2, User Manual

Page: 21 / 32

3 About Power System Configuration
User's Guide Smartpack2 Master Controller
350020.013, Issue 2.0, 2014 Jan
21
automatic configuration of specific functions
The “nn” in the file name specifies the unit’s CAN bus address.

Software Upgrade
which offers you to upgrade the firmware in connected controllers and
control units, by uploading files stored in the controller’s data storage device.
Read chapter “SD Card Storage - Overview Firmware Files (Binary
Format)”, page 21
Example of some of the available options in controller’s submenu:
Up/Download > Software Upgrade
# Description SW Info Note
Compack 11 405006.009 0A.M
Smartpack1 402073.009 3.05E
I/O Unit 1 402088.009 3.01
SD Card Storage - Overview Firmware Files (Binary Format)
You can store binary files in the Smartpack2 Master controller’s SD card (data storage
device) and use them for firmware upgrading of controllers and control units, as well as for
exporting and importing configuration files.
NOTICE:
All firmware upgrade and configuration files stored in the SC card
must have specific file names.
The SD card uses the 8.3 file name format. Before storing the files on the SD card, you
must rename them, so that they conform to the specific file names described below.
For example, if you receive the file “SmartPack2_Basic_405007.009_V1.1.mhx” to
upgrade your
Smartpack2 Basic controller firmware to version 1.1, you must first rename
the file to exactly “SP2BAS.MHX”, then copy the file to the SD card and finally insert the
SD card in the
Smartpack2 Master controller to start the firmware upgrade process.
# CAN Node File Name File Type CAN Node Type
Smartpack2 Master SP2MAST.BIN Firmware upgrade Controller
Smartpack2 Basic SP2BAS.MHX Firmware upgrade Controller
Smartpack2 Basic Industrial SP2BASIN.S19 Firmware upgrade Controller
Smartpack SP.MHX Firmware upgrade Controller
Smartnode SMARTNOD.MHX Firmware upgrade Control Unit
Battery Monitor BATTMON.HEX Firmware upgrade Control Unit
Load Monitor
LOADMON.HEX Firmware upgrade Control Unit
AC Mains Monitor MAINSMON.HEX Firmware upgrade Control Unit
I/O Monitor IO_UNIT.HEX Firmware upgrade Control Units:
I/O Monitor, Monitor2 & Monitor3
Flexi-Monitor
FLEXIMON.S19 Firmware upgrade Control Unit
Any node UNIT_aa.HEX Configuration File (Save/Load) All types
The “aa” refers to the CAN bus address or ID number.
E.g. “UNIT_82.HEX” could be the configuration file for I/O Monitor with CAN bus address 82.