Eltek Smartpack2, User Manual

Page: 15 / 32

3 About Power System Configuration
User's Guide Smartpack2 Master Controller
350020.013, Issue 2.0, 2014 Jan
15
3. About Power System Configuration
The Eltek DC power supply system’s functionality represents a vast set of functions,
characteristics or capabilities implemented in the hardware and software of the
controllers, control units and nodes connected to the system’s CAN bus.
You can use following types of user interfaces to access the functions and parameters:

The controllers’ front panel keypad
using software menus and submenu options

A standard web browser
to access the CWUI firmware (Controller Web-based User Interface), a
platform-independent user interface built-in the controllers

The PowerSuite program
A PC application run on computers using MS Windows operating systems
Logical Groups or Menu Options
All the mentioned functions, characteristics and parameters are fully configurable , and are
organized in following system-oriented logical groups (displayed only when the hardware
is connected and activated):

Power System

Mains

Generator

Rectifiers

Battery

Load

Control System

Solar

Wind

Converter
Also, these functions, characteristics and parameters are presented in following task-
oriented logical groups :
1. System Status
2. System Configuration
3. Alarm Configuration
4. Commands
5. Logs and Reports
6. Statistics
7. Commissioning
8. Up/Download
For detailed functionality description, browse and search through the Functionality
Description topic in the PowerSuite program’s Help or in Online Help .