27
8 - CONTROL BOARD FOR VERTICAL SLIDER
ACTION SOLENOIDS
(Code ORGMARE-V)
It can happen that, for organ need, some windchests are placed in a vertical way.
The sliders of the stops will have to be supported by magnets also after the initial impulse of
0,8 sec. Otherwise, after the initial impulse, the slider will return to the original position
because of the force of gravity.
The control card for the VERTICAL SLIDER ACTION SOLENOIDS (Code ORGMARE-V)
allows to regulate, besides the CONTROL FORCE, also the MAINTENANCE CURRENT that
is a current that keeps the magnet always pull when the stop is active.
This current can be regulated with a potentiometer depending on the need.
CHARACTERISTICS:
Voltage: da 12 a 24 V
Input: positive (jumper W1 for negative input)
Output with power MOS
Protection fuse (4 A - restorable)
Regulation of the CONTROL FORCE (forward-back) with an trimmer out of the cover
Regulation of the MAINTENANCE CURRENT with a trimmer out of the cover
Fixed excitation time (0,8 sec)
Overexcitation time at the maximum voltage at the beginning of the movement
selectable through a DIP SWITCHES (6-12-25-50 msec)
Led for the visualization of the excitation time
Led for the visualization of the maintenance current
Removable terminal strip with the possibility to solder the wires.
Plexiglass protection cover
Same dimensions and fixing perforation of the Laukuff board 10E359.2
Dimensions: 160 x 50 x 28 mm
