31
13 - BUTTON CONTROL BOARD WITH LAMP
(Code RELED)
Control card for button stops with lamp.
With an impulse the lamp switches on (stop ON) and with another impulse the lamp switches
off (stop OFF).
This board can be used when, on an organ with stops control magnet (on/off coil), we wish to
add further stops, unions or couplers with button control.
CHARACTERISTICS:
Control for n.2 stops
Power supply 12 ÷ 24 VDC
Dimensions: 67 x 92 mm
Baseboard with screw holes
Extractible terminals
with the possibility to
solder/weld the wires
14 - CONTROL CARD FOR SLIDING STOPS
(Code RESCOR)
Control card for sliding stops.
This board can be used when on an organ there are some couples of stop keys that control
the same stop and these stop keys must never be operating at the same time.
This board is connected to the OFF controls of the stop keys of the console and provide an
impulse to the corresponding stop keys when it is necessary to position them at rest.
CHARACTERISTICS:
Control for n.2 couples of stops
Power: 12 ÷ 24 VDC
Fuses of protection
Dimensions: 67 x 92 mm
Baseboard with screw holes
Extractible terminals
with the possibility to solder
the wires
