22
5.2 - ACCESSORIES OF THE TUNING KEYBOARD
RADIO REMOTE CONTROL FOR THE SLIDING OF THE NOTES
(Code ORGTA/TEL)
Radio remote control with three push-buttons to enable and suspend the sliding of the notes:
1 - Sliding of the notes to the HIGH
2 - Sliding of the notes to the LOW
3 - Pause
The receiver, installed in the ORGTAF keyboard unit,
assures
an high reliability in the
reception and a good working also in disturbed environments.
Four modes of sliding of the notes are available; they are selectable through a menu:
CHROMATIC: step per semitone
DIATONIC: step per tone
M THIRD:
step per Major third
M THIRD:
step per minor third
CHARACTERISTICS:
Power: alkaline battery 12V
Absorption: 7 ma circa
Frequency of work: 433,92 MHz
Dimensions: 40 x 90 x 20 mm
SERIAL SELECTOR for ON/OFF system (Code ORGTAS)
SERIAL SELECTOR for PROPORTIONAL system (Code ORGTASP)
SERIAL SELECTOR that cuts the serial connection between the MASTER and the SLAVE
(with the possibility to insert another MASTER, a RADIO or a TUNING KEYBOARD)
and
executes an automatic commutation between the two input lines. The first line (connector on
the left) has priority over the second one (central connector).
The supply also includes:
N.1 Kit connectors 9 pole (male + case).
CHARACTERISTICS:
Baseboard with screw holes
Dimensions: 75 x 125 x 30 mm
ON/OFF - PROPORTIONAL ADAPTER (Code ORGTA/CP)
Essential adapter to connect the TUNING KEYBOARD to an ORGDRIVE proportional
system.
It is used to adapt the signals and the voltage of
the keyboard (CURRENT LOOP – 24V ) to the
signals of the proportional system (RS485 – 12V).
CHARACTERISTICS:
Dimensions: 125 x 65 x 50 mm
