Quick start guide Eltako GFVS-Touch II
8
5
First-start-up
•
Connect the external power supply to a 230V socket and the GFVS-Touch II, the blue LED shows
power supply
•
To configure the software connect keyboard and mouse to the USB ports
•
Alternatively you can connect the Eltako GFVS-Touch II with a remote controlled PC via network
to configure the system
•
Using the Cross-Over-cable it is recommend to assign a fixed IP address, for details see menu item
5.8
Switch on the Eltako-GFVS Touch II. During start-up you will see the following dialog:
Figure 5: start-up-view
If necessary you can change to the recovery mode to restore a system backup. If no entry is made the
Eltako GFVS-Touch II will be started after 10 seconds.
Eltako GFVS 3.0-Software is already installed and launches automatically after switching on:
Figure 6: Start of the Eltako GFVS 3.0 software
