ELT Sensor Corp.
over 11 minutes. After the setting of
air-flowing status to be 400ppm finished
move back the Jumper-cap to
again.)
(For more information, please refer to detailed
recalibration manual)
Example setting :
ð
Monthly Automatic
operation mode
Wiring Method
VIN+: 24VAC P or 24VDC+,
VIN-: 24VAC N or 24VDC-(GND),
A-OUT: Output signal (Voltage or Curr
Ver.
setting of ambient
flowing status to be 400ppm finished,
cap to ‘OFF’ position
please refer to detailed
Monthly Automatic recalibrating
operation mode
(GND),
(Voltage or Current
).
Wire connector.
Output signal calculation
Ex) 3,000ppm range 0~10V mode.
Read voltage 3.234V
3,000ppm / 10V * 3.234 = 970 ppm.
Ex) 3,000ppm range 2~10V mode.
Read voltage 3.234V
(3.234V - 2V) * (3000ppm / 8)= 462 ppm.
--------------------------------------------------
ELT Sensor Corp.
(Chunui Technopark 101-909) 36, Bucheon
Wonmi-gu, Bucheon-si, Gyeonggi-do, 420
Phone : .82-32-719-8055
Fax : 82-70-8677-8055
http://www.eltsensor.co.kr
ELT Sensor All right reserved
Subject to change without notice. Printed in KOREA
Ver. 2.1 (Jan. 2014)
ire connector.
examples
Ex) 3,000ppm range 0~10V mode.
3,000ppm / 10V * 3.234 = 970 ppm.
Ex) 3,000ppm range 2~10V mode.
2V) * (3000ppm / 8)= 462 ppm.
--------------------------------------------------
909) 36, Bucheon-ro 198beon-gil,
do, 420-857, Korea
Subject to change without notice. Printed in KOREA
