Make sure your local network card is enabled to receive IP
automatically. The information below is for Windows 7:
• Select the
Start / Control Panel / Network and Internet /
Network and Sharing Center / Change adapter settings
option.
• With the right mouse button, select Local Connection
and go to Tools.
• Double click on "TCP / IP Protocol Version 4".
The screen on the side will be displayed:
• Make sure that the "Obtain an IP address automatically"
option is enabled.
• Press OK and exit all screens.
Enter your browser and start using the Internet. Advanced
setting can be made through the product setting page, as
described in the item "WEB Setting Page".
VERIFYING THE INSTALLATION
Typically, the installation will be completed in this step. After energizing the product, wait 1 and a
half minutes. Check, then, that it is already possible to browse the Internet by connecting the
network cable (RJ-45) to a notebook, PC, Access Point or Wi-Fi router.
If you are unable to navigate, proceed to the next step.
(Only if necessary).
SETTING THE IP ON THE COMPUTER