CAUTION:
To insert or remove the Sim Card, turn off the product or remove the network cable.
BEST SIGNAL FINDER
Once the carrier has been chosen and the reflector is correctly fitted, remove the AMPLIMAX cover and insert the SIM Card
in the correct position. Then reconnect the network cable from the POE, as shown according the figure.
As soon as the product is turned on, the display must show the message "Boot", followed by "Load", "- - - -" and the supply
voltage. If the product identifies a cellular network, it will display its name, followed by its band, signal level and technology in
a cyclical manner.
ANTENNA POINTING
FIT THE REFLECTOR TO THE CABINET (TOP TO BOTTOM)
SIM CARD POSITIONING
ANT EXT
ANT
INT/EXT
RJ45/POE
4G
SIM CARD
ANT EXT
ANT
INT/EXT
RJ45/POE
4G
SIM CARD
1
2
3
POE
Fit the reflector to the back
of the cabinet.
It must sliding like a drawer,
up to the limit of the path.
At the end, must activate
the lock with a "click".
The top view must appear as
in the figure below.
Attention to the
correct position
of the SIM Card
nano
NETWORK CABLE
RJ45 / Ethernet
Insert the card until the
end, when you feel a
"Click '
EASY
INSTALL
CELL
NETWORK
EASY
INSTALL
CELL
NETWORK
