4
Design and Function
enCore FC1
Operating Instructions
Page 33 of 97
Installation and Conversion of Process Boards
(p. 41)
This chapter describes the ways you can change the I/O board
equipment.
(p. 46)
This chapter includes connection diagrams for typical applications.
4.5.1 ExMFE5 Process Board
WARNING!
Risk of explosion
A risk of explosion exists if lines are connected to the
ExMFE5 board while the device is connected to the power
supply!
The transmitter-, pulse- and signal lines are connected only to the
ExMFE5 board if the FC1 is connected in a voltage-free manner.