Page 10 of 97
Operating Instructions
enCore FC1
2 About these Instructions
The present documentation are the Operating Instructions of the overall
documentation, and describe the assembly, installation, commissioning and
maintenance of the flow computer enCore FC1 (called FC1 below).
These instructions make it possible to work with the FC1 in a safe and
efficient manner.
Compliance with all the safety and handling instructions specified in these
Operating Instructions is a prerequisite to working with the FC1 in a safe
manner and using it properly, and for obtaining accurate measurement and
calculation results.
In addition, compliance is also necessary with the guidelines, standards,
local accident prevention regulations and general safety regulations that
apply for the FC1's area of application.
Manuals as product components
The volume “Use in Legal Metrology” and this “Operating
Instructions” are product components. Therefore, these must
always be kept in the immediate vicinity of the FC1 and easily
accessible to the installation, operational, maintenance and
cleaning personnel.
These two volumes are delivered in printed form with the device.
The illustrations in this manual serve to depict the facts that are being
explained, and therefore may differ from the actual design of the FC1
depending on the configuration of FC1 and enSuite.
The data and material properties that are presented below are
guidelines. They must be reviewed for each individual case and
corrected if required.