Device Configuration and Commissioning
5
enCore FC1
Operating Instructions
Page 59 of 78
8. Click on the "Finish" button to confirm installation is complete.
The installation wizard is completed and the enSuite can be started.
5.1.3 Installation of the USB driver
The installation of the driver has to be carried out when an enCore device is
connected to a computer via USB for the first time.
The following steps are required:
1. Connect the enCore device and your computer via USB (a suitable USB
cable type A/B is included in delivery)
2. The ‘Found New Hardware Wizard’ starts automatically.
The USB driver is included in the enSuite installation files. Therefore,
choose option ‘No, not this time’ when asked for permission to connect
to the Windows update website.
3. Click on the “Next” button to start the installation process.
Figure 5-7