THURSDAY, 27 FEBRUARY 2014
PAGE 6 OF 31
EMS75VR-ROYAL-VENDING-INSTALLATION AND USER GUIDE-ISS3
2.0
Install the ems75vr
2.1
ems75vr installation
Mount the bracket fitted with the ems75vr controller and remote display in the base of the vending machine.
Then, connect the ems75vr controller to the mains supply, compressor, and lights.
2.2
How to install the ems75vr
Install the ems75vr as follows:
1.
Ensure that the mains supply is switched off.
High voltages, surfaces with high temperatures, and sharp edges are
present within the vending machine.
if you have any doubts, contact your supervisor before starting this
procedure
2.
Open the vending machine door and place the ems75vr and bracket in the location shown below.
