23
4. Operating command in case of wind or rain alarm
After the setting of the operating direction, you may now select whether the
operating command in case of wind or rain alarm is temporary or permanent.
After the wind or rain alarm has been activated, the shading is retracted. The
operating command for the connected drive mechanism either ends after 4
minutes or is permanently maintained as long as the alarm message exists.
The permanent operating command is necessary if Solexa is used as control
centre for wired motor drive units (e. g. IMSG 230) which control several drive
mechanisms or when combined with a Lixa patio roof control.
Press the key
in order to switch between the displays Off and On.
Select
if in case of alarm, the operating command shall stop after 4 minutes
(setting for conventional awning or blind control systems) or
if in case of alarm, the operating command shall be permanently
activated (operating command ends as soon there is no alarm
message anymore).
Press the
key in order to access the next setting step.