![background image](http://html1.mh-extra.com/html/elsner-elektronik/corlo-touch-knx-5in/corlo-touch-knx-5in_technical-specifications-and-installation-instructions_2396716011.webp)
11
Load individual images
Display Corlo Touch KNX 5in
• Status: 22.02.2017 • Technical changes and errors reserved.
Images that are shown as the screensaver must be stored on a micro SD card. In order
that the system can recognize the SD card, carry out a reset in the menu after inserting
it
Settings> System > Reset
This is not
necessary
if the card was inserted before booting the system. The card must
remain in the device.
Store images in the given size in a corresponding folder on the top level of the SD card:
Images for individual image display ("diafix" folder) must have a 4-digit numerical
sequence so that they can be called up in the ETS and in the menu (0001...9999).
6.2. Images for image display
Images can be called up as a stationary display (e. g. welcome screen). In contrast to
the screensaver, the touch function is disabled while a stationary image is displayed.
Images that are to be called up via the "Stationary Image" communication object must
be stored on a micro SD card. In order that the system can recognize the SD card, carry
out a reset in the menu after inserting it
Settings> System > Reset
This is not
necessary
if the card was inserted before booting the system. The card must
remain in the device.
Store images in the given size in a corresponding folder on the top level of the SD card:
Stationary images must have a 4-digit numerical sequence so that they can be called
up in the ETS and in the menu (0001...9999).
6.3. Exchanging images and graphics
For the
Corlo Touch KNX 5in
display pages, a large number of icons from the area
of security, multimedia, sensors, operation, house, light and air conditioning and drive
control are available and these are stored in the device. However, you can also use
proprietary symbol graphics and rotary control graphics.
Images that are shown as icons must be stored on a micro SD card. In order that the
system can recognize the SD card, carry out a reset in the menu after inserting it
Settings> System > Reset
Image type
Resolution
File format
Folder name
Images for slide show
800 × 480 pixels
.jpg (RGB mode)
slideshow
Images for
individual image
display
800 × 480 pixels
.jpg (RGB mode)
diafix
Image type
Resolution
File format
Folder name
Stationary images
800 × 480 pixels
.jpg (RGB mode)
festbilder