![background image](http://html.mh-extra.com/html/elsner-elektronik/arexa/arexa_manual_2396690031.webp)
30
Check whether cover and bottom are
correctly engaged! The figure illustrates the
closed weather station from below.
Mounting of the weather station
Push the housing into the mounted holder
from above. The journals of the holder must
engage with the rails of the housing.
If you want to remove the weather station, you must pull it out of the holder in
upwards direction against the resistance of the engagement.
Details for the installation of the weather station
Do not open the weather station if water (rain) might ingress: Even some drops
might damage the electronic system.
Observe the correct installation. Wrong installation might destroy the weather
station and the control electronics.
Please take care not to damage the temperature sensor (small circuit board at
the bottom part of the housing.) when mounting the weather station. Please also
take care not to break away or bend the cable connection between the circuit
board and the rain sensor when connecting the weather station.