![background image](http://html1.mh-extra.com/html/elsner-elektronik/70715/70715_installation-and-adjustment_2396651028.webp)
26
Parameter setting
Radio Actuator KNX RF S1R-B2 compact
• Version: 16.09.2020 • from application 1.0 •
Technical changes and errors excepted.
The input can be blocked using a blocking object. Set what is transmitted to the bus
when (de)activating blocking.
For active blocking there is
no
cyclical transmission.
Input as changeover switch:
If a button with switch function is assigned to the input, select the bus function
"Changeover Switch" and specify if the button should switch when pressed/released.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input to shutter, blinds, awning or window control:
If the input to the drive control is used via the bus, select the bus function "shutter",
"awning", "blinds" or "window" and specify the button function and control mode.
Send value
• no change
• for change to 1
• for change to 0
• for change and cyclical
• for change to 1 and cyclical
• for change to 0 and cyclical
Cycle
(if sent cyclical)
5 s • 10 s • 30 s • 1 min • 2 min • 5 min • 10
min • 20 min • 30 min • 45 min • 1 h • 1,5 h •
2 h
Use blocking object
No • Yes
Once when activating the blocking
• send 0
• send 1
• do not send telegram
Once when deactivating the blocking
• send 0
• send 1
• do not send telegram
• send current state
Function
Changeover Switch
Command when pressing the button
• Switching
• do not send telegram
Command when releasing the button
• Switching
• do not send telegram
Use blocking object
No • Yes
Summary of Contents for 70715
Page 2: ......