![background image](http://html1.mh-extra.com/html/elsner-elektronik/70715/70715_installation-and-adjustment_2396651032.webp)
30
Parameter setting
Radio Actuator KNX RF S1R-B2 compact
• Version: 16.09.2020 • from application 1.0 •
Technical changes and errors excepted.
Dead man's switch:
The drive moves as soon as the button is actuated and stops as soon as the button is
released.
6.2.2. Channel settings – switch functions
If two switchable devices are connected to the output channel, two separate channels
will appear (e.g. "Channel A1 – switch function" and "Channel A2 – switch function").
First set the general specifications for the connected device and, if necessary, activate
the connections, time functions and blocking objects. A diagram is found in chapter
Channel settings – switch functions
Point in time 0:
Actuate of button, start of time 1
Release before time 1 expired:
step (or stop if drive is moving)
Point in time 1:
End of time 1, start of time 2
Moving command
Release after time 1 expired
but before time 2 expires:
Stop
Release after time 1 + 2 expired:
Move into end position
Control mode
Comfort mode
Behavior during button operation:
Button is pushed and
released before time 1 expired = stop/step
held longer than time 1 = Up or Down
released between time 1 and 1-2= stop
released after time 1 +2 = no more stop
Time 1
0.0s ... • 2 s; 0.4 s
Time 2
0 s • 2 s; 2 s
Control mode
Dead man's switch
Behavior during button operation:
Push button = Up or Down command
Release button = Stop command
Relay operation
closer • opener
Behavior after reset and ETS download
• opened
• closed
Time 1
Time 2
0
1
1 + 2
Fig. 3
Time interval comfort mode diagram
Summary of Contents for 70715
Page 2: ......