9
Parameter setting
Door operator control module KNX A3-B2
• Status: 17.12.2019 • Technical changes and errors reserved.
Impulse mode:
(1, 2 or 3 doors)
Output 1 reacts to the (is assigned to the object)
Output 1 - Impulse
and receives an
impulse (closes for 1 s) when the object value is 1.
Output 2 reacts to the (is assigned to the object)
Output 2 - Impulse
and receives an
impulse (closes for 1 s) when the object value is 1.
Output 3 reacts to the (is assigned to the object)
Output 3 - Impulse
and receives an
impulse (closes for 1 s) when the object value is 1.
No further settings can be made for the outputs.
Dead-man mode:
(2 doors)
Output 1 react to the object (is assigned to the object)
Output 1 - Impulse
. At value = 1,
the output closes; at value 0, it opens.
Output 2 react to the object (is assigned to the object)
Output 2 - Impulse
. At value = 1,
the output closes; at value 0, it opens.
Output 3 react to the object (is assigned to the object)
Output 3 - Impulse
and gets an
impulse (closes for 1 second) at object value 1.
In addition, monitoring can be set. After the monitoring period, the object is set to 0
(unless a new 1 signal is received), i.e. the output is opened:
When receiving "Output 1 + 2 - Impulse"
when object value = 1
Output 1 Impulse
When receiving "Output 1 + 2 - Impulse"
when object value = 0
Output 2 Impulse
When receiving "Output 3 - Impulse" when
object value = 0 or 1
Output 3 Impulse
Output 3 relay contact
normally closed • normallly open
Operating mode
Impulse mode
Allows control of up to three doors
When receiving "Output 1 - Impulse" when
object value = 0
nothing
When receiving "Output 1 - Impulse" when
object value = 1
Output 1 Impulse
When receiving "Output 2 - Impulse" when
object value = 0
nothing
When receiving "Output 2 - Impulse" when
object value = 1
Output 2 Impulse
When receiving "Output 3 - Impulse" when
object value = 0
nothing
When receiving "Output 3 - Impulse" when
object value = 1
Output 3 Impulse
Summary of Contents for 70391
Page 1: ...EN Installation and Adjustment KNX A3 B2 Door Operator Control Module Item number 70391...
Page 2: ......
Page 17: ......
