elsner elektronik 70147, Installation And Adjustment

Page: 14 / 26

12 Transfer protocol
Intelligent Power Supply KNX PS640-IP 2U • Version: 21.09.2021 • Technical changes and errors excepted.
16 KNX bus
reset Initialize Triggered by a telegram
with value 0 or 1, the device
starts a reset process. 1 bit C-WTU
17 KNX bus
reset
number Send
counter
value „With „“Cyclic sending““
the device sends the
number counter value of
KNX bus resets.“ 2 bytes CR-T-
18 Total
operating
time Send
counter
value „With „“Sending
difference““ the device
sends the time counter
value of the total operating
time in s.“ 4 bytes CR-T-
19 Operatin
g time
since
startup Send
counter
value „With „“Sending
difference““ the device
sends the time counter
value of the time elapsed
since last device startup in
s.“ 4 bytes CR-T-
20 Startup
number Send
counter
value „With „“Cyclic sending““
the device sends the
number counter value of
device startups.“ 2 bytes CR-T-
21 Duration
1 Send
counter
value „With „“Sending
difference““ the device
sends the time counter
value (in s) of a pre-selected
variable (output current,
output voltage,
temperature) being in the
threshold range.“ 4 bytes CR-T-
22 Counter 1 Send
counter
value „With „“Sending
difference““ and „“Cyclic
sending““ the device sends
the number counter value
(in s) indicating the number
of threshold events (for
output current, output
voltage, temperature).“ 2 bytes CR-T-
23 Threshol
d 1 Send
alarm
status With the measured value
entering the threshold
range a telegram with value
0 or 1 is sent. After
returning to normal
operating and passing
hysteresis a telegram with
value 0 or 1 is sent. 1 bit CR-T-
No. Name Function Description Lenght DPT Flags