2020/04/07
WCC Lite user manual
5 Installing the WCC Lite
5.1
Mounting
To mount the device:
1. Secure the top of the mounting clip onto a DIN rail.
2. Push the bottom of a device forward to fix the clip in place.
To dismount the device:
1. Pull red coloured clip downwards (found at the bottom side of the DIN rail).
2. Pull back the bottom of the device.
3. Pull device upwards to dismount it.
Figure 2: WCC Lite DIN rail mounting clip
5.2 Power
WCC Lite It is recommended to power WCC Lite from 6W (minimum) 1224V DC power supply. A
full range is 5V to 36V.
Note: Make sure that device is compatible with your power source before
proceeding! Check the label next to power connector or on the side of device.
5.3 SIM card slot
WCC Lite has pushpush type microSIM card connector with card detection function. The connector
is located on the front panel of WCC Lite. To access it, remove a transparent front panel cover. To
insert a SIM card gently push it inside (see Figure below) until it locks in place. Press again to release
and remove the card.
15
1.4.0 | ELSETA | Installing the WCC Lite
