Page 20
3EE490044EU – 09/19
ELRO-Werke AG
Wohlerstrasse 47
5620 Bremgarten
- Press to select:
"Start" a cleaning cycle.
- The screen indicates the different phases selected for the cycle, the running time and remaining time. When the cleaning cycle has
finished the Service screen is displayed again.
8.2 “AUTO” CLEANING (cleaning programmed every day of the week):
- Switch the oven on.
- Wait until the start up screen disappears. If preheating starts press STOP.
- Select the Service screen.
- Press to select:
"Auto cleaning"
- Put in your PIN code (0000 by default, select Client parameters in the service screen) then validate.
- The daily cleaning screen will appear.
- For each day select the level of clean required and the time by pressing the corresponding touch button then validate
"Programming screen".
- The automatic cleaning programme is displayed. The cleaning cycle will start at the set hour each day and at the intensity selected
- To deactivate the automatic cleaning select Manual cleaning enter your PIN. The values programmed in will be remembered for the
next time you select automatic cleaning.
"Manual cleaning"
- Please note: If a cooking cycle is running at the time an automatic wash should start the cleaning cycle will be cancelled.
8.3 CYCLE AND TIMES
INTENSITY
Total wash cycle*
Total complete cycle*
*Time in minutes for 6 and 10 ovens / 20 level ovens
Light cycle
Medium cycle
Intensive cycle
Temperature adjustment
(if hot)
5’
5’
5’
Cleaning*
19’ /20’
23’ /24’
39’ /41’
Rinsing*
12’ /13’
12’ /13’
12’ /13’
Drying
(if activated)
4’
4’
4’
31' / 33'
35' / 37'
51' / 54'
40' / 42'
44' / 46'
60' / 63'
